Horizontal Single Stage Centrifugal Pumps (SMS Series)
Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or electric motor.
Typical Applications
> Cooling Water System
> Domestic Water Supply
> Sprinkle System
> Agriculture
> Boosting & Circulation System
> Water Treatment
Features
> Close coupled horizontal single-stage centrifugal pump with all wetted parts is made up of stainless steel
304. (Stainless steel 316 is available on request).
> Designed with axial suction and vertical discharge in which the piping connections for both are threaded.
> The impeller is mounted directly to the motor shaft extension, hence suitable for continuous duty.
> Standard motor supplied as:
IEC standard, 50Hz, single phase 220V-240V or three phase 380V-415V, 2900RPM, aluminum casing, IP55,
class F.
> Maximum ambient temperature: +50°C
> Liquid temperature range: -10°C to +85°C (Max.)
> Capacity is up to 28m³/hr.
> Pressure head is up to 40m.
Typical Applications
> Cooling Water System
> Domestic Water Supply
> Sprinkle System
> Agriculture
> Boosting & Circulation System
> Water Treatment
Features
> Close coupled horizontal single-stage centrifugal pump with all wetted parts is made up of stainless steel
304. (Stainless steel 316 is available on request).
> Designed with axial suction and vertical discharge in which the piping connections for both are threaded.
> The impeller is mounted directly to the motor shaft extension, hence suitable for continuous duty.
> Standard motor supplied as:
IEC standard, 50Hz, single phase 220V-240V or three phase 380V-415V, 2900RPM, aluminum casing, IP55,
class F.
> Maximum ambient temperature: +50°C
> Liquid temperature range: -10°C to +85°C (Max.)
> Capacity is up to 28m³/hr.
> Pressure head is up to 40m.
Inquiry - Horizontal Single Stage Centrifugal Pumps (SMS Series)